Building Octagon Picnic Table

Dec 25th

Octagon Picnic Table – It’s summer and you want to entertain your family and friends in your own backyard or patio with an octagon picnic table . The first cutting board will be for the frame. At 99 inches, marking a 2 by 4 on both sides to form a “V” using a 60 degree angle. The other two 2 by 4s should be marked at 48 1/2 inches. One side should be square and there should be an angle of 60 degrees on the other side.

Octagon picnic table, cut four 2 per 4s to 49 1/8 inches, leaving a square of side and put a 60 degree angle at the other end. You’ll need a cut of 45 degrees so that when you look at the 2 by 4 from the top, it will look as if it has a point. Cut your square side that would measure 3/4 inch on both sides, then cut a 45-degree angle on both sides of the card. These cuts are to the lower frame of the picnic table.

Related  Outdoor Gas Fire Pit Table

Octagon picnic table measures differ for the top: cut 2 by 4 to 64 inches and make a mark on both sides in a form of “V” with an angle of 60 degrees. Then cut a 2 with 4-31 inches with a square of side and with a 60-degree angle to the other side. A sloping cut of 45 degrees will be needed on the square side.